EKI-1352 2-port RS-232/422/485 to 802.11b/g WLAN Serial Device Server
Overview
The EKI-1352 is a single port wireless serial device server that bring RS-232/422/485 to wireless Ethernet. It allows nearly any device with serial ports to connect and share a Wireless Ethernet network. The EKI-1352 provides a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network.
With the EKI-1352 your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or Wireless Ethernet side. This data can be sent bilaterally. Thus, the EKI-1352 is especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
Features
- Link any serial device to an IEEE 802.11 b/g network
- Supports wireless LAN Ad-Hoc and Infrastructure modes
- Supports baud rates up to 921.6kbps
- Provides COM port redirection, TCP, UDP, and pair connection modes
- Provides Web-based configuration and Windows utility
- Supports Windows 2000/XP/Vista drivers
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 4 hosts to be accessed as TCP client mode
- Software selectable RS-232/422/485 communication
- Mounts on DIN-rail, wall or panel
- Built-in 15KV ESD protection for all serial signals
- Automatic RS-485 data flow control
- Supports DHCP protocol
- Supports secure access with WEP,WPA,WPA2
Specifications
Ethernet Communications
| • Compatability | IEEE 802.11b, IEEE802.11g |
| • Speed | 11/54 Mbps |
| • Network Mode | Infrastructure, Ad-Hoc |
| • Antenna Connector | Reverse SMA |
| • Free Space Range | Open space 100m |
| • Wireless Security | WEP, WPA, WPA2 |
Serial Communications
| • Port Type | Software selectable RS-232/422/485 port |
| • Connectors | D-sub 9 male |
| • Protection | 15kV ESD protection for all signals |
| • Data Bits | 5, 6, 7 or 8 |
| • Stop Bits | 1, 1.5 or 2 |
| • Parity | None, Even, Odd, Space or Mark |
| • Baud Rate | 50 bps to 921.6 kbps |
| • Serial Signals | RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND |
| | RS-422: TxD+, TxD-, RxD+, RxD-, GND |
| | RS-485: Data+, Data-, GND |
Software
| • Driver Support | Windows2000/XP/Vista |
| • Utility Software | Advantech Serial Device Server Configuration Utility |
| • Operation Modes | COM port redirection mode (Virtual COM) |
| | TCP/UDP server (polling) mode |
| | TCP/UDP client (event handling) mode |
| | Pair connection without AP (peer to peer) mode |
General
| • LED Indicators | System: Power, System Status |
| | WLAN: Quality, Fail, Link/Active |
| | Serial: Tx, Rx |
| • Reboot Trigger | Built-in WDT (watchdog timer) |
Mechanics
| • Dimensions | 37 x 140 x 95 mm (W x H x D) |
| • Enclosure | Metal with solid mounting hardware |
| • Weight | 603g |
| • Mounting | DIN-rail, Panel |
Power Requirements
| • Input Voltage | 12 ~ 48 V⊂DC, redundant dual inputs |
| • Power Connector | Screw Terminal Block |
| • Power Consumption | 4.0W |
Environment
| • Operating Temperature | 0 ~ 50°C |
| • Storage Temperature | -20 ~ 80°C |
| • Operating Humidity | 5 ~ 95% RH |
Regulatory Approvals
| • EMC | CE, FCC Part 15 Subpart B (Class B) |
| • Safety | UL (UL60950-1) |
| • Hazardous Location | UL/cUL Class 1, Divivision 2 |