This months featured product is the ADAM-4520 RS-232 to RS-485 converter.
Link to the Product Page
Tel: 087-701-8559
Tel: 011-706-7913
Fax: 086-671-6808
Email: info@promicro.co.za
To email an enquiry: Click here
Physical:
52 Shepherd Avenue
Bryanston
2021
Postal:
P O Box 593
Cramerview
2060
Download the EKI-1224 data sheet. | |
Click here to request a quotation for the EKI-1224 |
The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based devices. The EKI-1224 features two independent Ethernet ports and MAC addresses to provide a redundant networking mechanism to guarantee Ethernet networking reliability. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility to thousand of devices that can not connect to a network. The EKI-1224 provides a feature that can allow users to select master or slave operation mode for each serial port. They not only allow an Ethernet master to control serial slaves, but also allow serial masters to control Ethernet slaves.
Ethernet Communications | ||
• | Compatability | IEEE 802.3, IEEE 802.3u |
• | Speed | 10/100 Mbps |
• | No. of ports | 2 |
• | Port Connector | 8pin RJ45 |
• | Protection | Built-in 2.25kVDC magnetic isolation |
Serial Communications | ||
• | Port Type | Software selectable RS-232/422/485 port ("CI" model supports RS-422/485) |
• | No. of Ports | 4 ports |
• | Connectors | D-sub 9 male |
• | Protection | 15kV ESD protection for all signals 'CI' models: 2KV Isolation for RS-422/485 signals |
• | Data Bits | 5, 6, 7 or 8 |
• | Stop Bits | 1, 1.5 or 2 |
• | Parity | None, Even, Odd, Space or Mark |
• | Flow Control | XON/XOFF, RTS/CTS |
• | Baud Rate | 50 bps to 921.6 kbps |
• | Serial Signals | RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND |
RS-422: TxD+, TxD-, RxD+, RxD-, GND | ||
RS-485: Data+, Data-, GND | ||
Software | ||
• | Driver Support | Windows XP/7/8.1/10. Windows Server 2003/2008/2012/2016/2019 and Linux |
• | Utility Software | Advantech EKI Device Configuration Utility |
• | Operation Modes | Modbus RTU Master/Slave mode Modbus ASCII Master/Slave mode |
• | Configuration | Windows utility, Telnet console, Web Browser |
• | Protocols | ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet, SNMP, HTTP, DNS, SMTP, ARP, NTP |
Mechanical | ||
• | Dimensions | 42 x 140 x 95 mm (W x H x D) |
• | Enclosure | Metal with solid mounting hardware |
• | Weight | 555g |
• | Mounting | DIN-rail, Panel |
• | IP Rating | IP30 |
General | ||
• | LED Indicators | System: Power, System Status |
LAN: Speed, Link/Active | ||
Serial: Tx, Rx | ||
• | Reboot Trigger | Built-in WDT (watchdog timer) |
Power Requirements | ||
• | Input Voltage | 12 ~ 48 VDC, redundant dual inputs |
• | Power Connector | Screw Terminal Block |
• | Power Consumption | 4.1W |
Environment | ||
• | Operating Temperature | -10 ~ 60°C "CI & I" models -40 ~ 80°C |
• | Storage Temperature | -40 ~ 85°C |
• | Operating Humidity | 10 ~ 95% RH |
Regulatory Approvals | ||
• | EMC | CE, FCC Part 15 Subpart B (Class A) |
• | Safety | UL (UL60950-1) |
• | MTBF | 1 102 913 hrs |
• | Hazardous Location | UL/cUL Class 1, Division 2, Goups A, B, C and D. ATEX (Zone 2 Ex nA nC IIC T4 Gc) |
Port to port isolation ("CI" models) | ||
• | Serial to Ethernet | 2.25kVDC |
• | Serial to Power | 2kVDC |
• | Ethernet to Power | 2.25kVDC |
Ordering Informationtion | ||
• | EKI-1224 | 4-port RS-232/422/485 Modbus Gateway |
• | EKI-1224I | 4-port RS-232/422/485 Modbus Gateway with Wide Operating Temperature> |
• | EKI-1224CI | 4-port RS-422/485 Modbus Gateway with Wide Operation Temperature and Isolation |