EKI-1121L 1-port RISC-based Industrial Communication Controller
Overview
The EKI-1121L is a RISC-based embedded communication controller which provides dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one software-selectable RS-232/422/485 serial ports. The EKI-1121L uses the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Features
- ARM7 32-bit 80MHz processor
- 8MB Flash ROM on board
- 16MB SDRAM
- 2 x 10/100 Mbps Ethernet ports for LAN redundancy
- 1 software selectable RS-232/422/485 serial ports
- 50 bps to 921.6 kbps baud rate
- Built-in real-time clock (RTC)
- Class I, Division 2 certification
- Pre-installed Linux Kernel 2.4 platform
- Easy mounting on DIN-rail or panel
- Wide operating temperature range : -10 ~ 60°C
Specifications
System
| • CPU | ARM7 32-bit RISC CPU, 80MHz |
| • Flash | 8MB |
| • SDRAM | 16MB |
| • OS (pre-installed) | µClinux |
| • Console Port | RS-232, 3-wire (Tx, RX, GND) pin Header |
| • Other | RTC, watchdog timer |
Ethernet Interface
| • LAN | 2 x auto-sensing 10/100 Mbps ports |
| • Connector | RL-45 |
| • Protection | 1.5kV magnetic isolation protection |
Serial Interface
| • Serial Standards | Software selectable RS-232/422/485 ports |
| • Connectors | D-sub 9 male |
| • Protection | 15kV ESD protection for all signals |
Serial Parameters
| • Data Bits | 5, 6, 7 or 8 |
| • Stop Bits | 1, 1.5, or 2 |
| • Parity | None, Even, Odd, Space or Mark |
| • Flow Control | RTS/CTS, XON/XOFF, automatic RS-485 data flow control |
| • Baud Rate | 50 bps to 921.6 kbps |
Serial Signals
| • RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND |
| • RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| • RS-485 | Data+, Data-, GND |
LEDs
| • System | OS ready, power 1 and power 2 ready |
| • LAN | Speed (10/100 Mbps), link/active (on connector) |
| • Serial | TxD, RxD |
Mechanics
| • Dimensions | 37 x 140 x 95 mm (W x H x D) |
| • Housing | Metal |
| • Weight | 600g |
| • Mounting | DIN-rail, Panel |
Power Requirements
| • Input Voltage | 12 ~ 48 VDC, redundant dual inputs |
| • Power Consumption | 2.5W |
Software (µClinux)
| • Kernel Version | 2.4.31 |
| • Protocol Stack | TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE |
| • File System | ROMFS/JFFS2 |
| • System Utility | busybox, telnet, ftp, sash, tftp |
| • Daemon | pppd, snmpd, telnetd, inted, ftpd, boa |
| • Linux Tool Chain | Arm-elf-gcc: C/C++ PC Cross Compiler |
| • µClibc | POSIX Standard Library |
Environmental Limits
| • Operating Temperature | -10 ~ 60°C |
| • Storage Temperature | -20 ~ 80°C |
| • Operating Humidity | 5 ~ 95% RH |