ADAM-6052 16-ch Source-type Isolated Digital I/O Modbus TCP Module

	Download the data sheet.
	Request a quotation for the ADAM-6052

Overview

The ADAM-6052 provides 8 digital inputs and 8 digital outputs with 2000V RMS isolation protection. It connect to an Ethernet network via Modbus/TCP. The digital input channels can be used as counters or frequency inputs while the digital outputs provide a pulse output function. The digital outputs feature 1A source type drive current with over current protection.

Features

• 8 Digital Input Channels
• 8 Digital Output Channels
• Supports Wet/Dry contacts
• High Drive Source Type Outputs
• Supports Peer-to-peer
• Supports Graphic Condition Logic
• Easy mounting on DIN-rail , panel piggyback
• 10/100Based-T Ethernet
• Supports Modbus/TCP

Specifications

Digital Input

• Channels 8
• Dry Contact
  Logic Level 0: close to GND
  Logic Level 1: open
• Wet Contact
  Logi Level 0: 0 - 3V_DC
  Logic Level 1: 10 - 30V_DC
• Supports 3kHz Counter Input (32bit + 1-bit overflow)
• Keep/Discard Counter Value when Power-off
• Supports 3kHz Frequency Input
• Supports Inverted DI Status

Digital Output

• Channels 8 (source type)
• Voltage Range 10 to 35V_DC
• Current 1A (per channel)
• Supports Over Current Protection
• Supports 5kHz Pulse Output
• Supports High-to-Low and Low-to-High Delay Output

Ethernet Communications

• Compatibility IEEE 802.3, IEEE 802.3u
• Speed 10/100 Mbps
• No. of ports 1
• Port Connector 8-pin RJ-45
• Protection Built-in 1.5KV magnetic isolation

General

• Watchdog Timer System (1.6second) and Communication (programmable)
• Supports Modbus/TCP,TCP/IP,UDP and HTTP Protocols
• Protection
  Over-voltage Protection ±35V_DC
  Isolation Protection 2000V_DC
• Built-in TVS/ESD Protection
• Power Reversal Protection

Mechanics

• Dimensions (H x W x D) 70 x 130 x 30mm
• Enclosure ABS + PC with solid mounting hardware
• Mounting DIN 35 rail, stack, wall

Power Requirements

• Power Input Unregulated 10 - 30V_DC
• Power Consumption 2W @ 24 V_DC

Environment

• Operating Temperature -10 to 70°C
• Storage Temperature -20 to 80°C
• Operating Humidity 20 to 95% RH (non-condensing)
• Storage Humidity 0 to 95% RH (non-condensing)