ADAM-6022 Ethernet-based Dual-loop PID Controller

Download the ADAM-6022 data sheet.

Overview

Advantech's ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, and Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

Features

• 2 loop PID control algorithms built in one package
• 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
• Support multiple analog I/O ranges: 0 ~ ±10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
• Support heating/cooling (direct/reverse) action mode
• Support loop open/close (PID disable/enable) and analog output manual control modes
• Easy mounting on DIN-rail , panel piggyback
• 10/100Based-T Ethernet
• Supports Modbus/TCP

Specifications

Analog Input

• Channels 6 differential
• Resolution 16-bit
• Sampling Rate 10 samples/second
• Input Impedance >20 MΩ
• Input Ranges ±10V_DC, 0 - 20mA and 4 - 20mA
• Accuracy±0.1% or better (voltage)
• Span Drift ±25ppm/°C
• Zero Drift ±6µV/°C

Analogue Output

• Channels 2
• Output Type V, mA
• Output Range 0 -10V_DC, 4 - 20mA and 0 - 20mA

Digital Input

• Channels 2
• Dry Contact
  Logic Level 0: close to GND
  Logic Level 1: open
• Wet Contact
  Logi Level 0: 0 - 3V_DC
  Logic Level 1: 10 - 30V_DC

Digital Output

• Channels 2 Open Collector to 30V, 100mA max.load
• Power Dissipation 300mW for each module

Ethernet Communications

• Compatibility IEEE 802.3, IEEE 802.3u
• Speed 10/100 Mbps
• No. of ports 1
• Port Connector 8-pin RJ-45
• Protection Built-in 1.5KV magnetic isolation

General

• Loop Number 2 (3AI, 1 AO, 1 DI and 1 DO for each control loop
• Watchdog Timer System (1.6second) and Communication (programmable)
• Supports Modbus/TCP, TCP/IP, UDP, RESTful, MQTT and SNMP Protocols
• Protection
  Overvoltage Protection ±35V_DC
  Isolation Protection 2000V_DC
• Built-in TVS/ESD Protection
• Power Reversal Protection

Mechanics

• Dimensions (H x W x D) 70 x 130 x 30mm
• Enclosure ABS + PC with solid mounting hardware
• Mounting DIN 35 rail, stack, wall

Power Requirements

• Power Input Unregulated 10 - 30V_DC
• Power Consumption 4W @ 24 V_DC

Environment

• Operating Temperature -10 to 70°C
• Storage Temperature -20 to 80°C
• Operating Humidity 20 to 95% RH (non-condensing)
• Storage Humidity 0 to 95% RH (non-condensing)