ADAM-6015 7-ch Isolated RTD Input Modbus TCP Module

Download the ADAM-6015 data sheet.

Overview

The ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Multi input ranges are allowed in one module, creating a cost-effective solution. Most important of all, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire has been broken. It specifically aims at building and factory temperature monitoring applications.

Features

• I/O Type: 7 RTD
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Pt 100/1000, Ni, Balco 500
• Wiring burn-out detect function
• Easy mounting on DIN-rail , panel piggyback
• Supports Modbus/TCP

Specifications

Analog Input

• Channels 7 differential
• Resolution 16-bit
• Sampling Rate 10 samples/second
• Input Impedance >10 MΩ
• Input Type Pt, Ni and Balco RTD
• Input Connection 2 or 3 wire
• RTD Types and Input Ranges
  • Pt RTD 100 ohms

    Pt	-50°C	to	+150°C
    Pt	0°C	to	+100°C
    Pt	0°C	to	+200°C
    Pt	0°C	to	+400°C
    Pt	-200°C	to	+200°C

    IEC RTD 100 Ohms (a=0.00385)

    JIS RTD 100 Ohms (a=0.00392)

  • PT 1000 RTD

    Pt

    -40°C

    to

    +160°C

  • Balco 500 RTD

    -30°C

    to

    +120°C

  • Ni 518 RTD

    Ni	-80°C	to	+100°C
    Ni	0°C	to	+100°C

  • Accuracy ±0.1% or better
  • Span Drift ±25ppm/°C
  • Zero Drift ±6µV/°C
  • Wire Burn-out Detection

  Ethernet Communications

  • Compatibility IEEE 802.3, IEEE 802.3u
  • Speed 10/100 Mbps
  • No. of ports 1
  • Port Connector 8-pin RJ-45
  • Protection Built-in 1.5KV magnetic isolation

  General

  • Watchdog Timer System (1.6second) and Communication (programmable)
  • Supports Peer to Peer mode 1
  • Supports Graphical Condition Logic
  • Supports Modbus/TCP,TCP/IP,UDP and HTTP Protocols
  • Protection
    
    • Overvoltage Protection ±35V_DC
    • Isolation Protection 2000V_DC
  • Built-in TVS/ESD Protection
  • Power Reversal Protection

  Mechanics

  • Dimensions (H x W x D) 70 x 130 x 30mm
  • Enclosure ABS + PC with solid mounting hardware
  • Mounting DIN 35 rail, stack, wall

  Power Requirements

  • Power Input Unregulated 10 - 30V_DC
  • Power Consumption 2W @ 24 V_DC

  Environment

  • Operating Temperature -10 to 70°C
  • Storage Temperature -20 to 80°C
  • Operating Humidity 20 to 95% RH (non-condensing)
  • Storage Humidity 0 to 95% RH (non-condensing)